Ducted air conditioning Hawthorn homes choose is usually about one thing: heating and cooling every room from one system, with nothing on the walls but grilles and a controller. Hawthorn sits about 6 km east of the Melbourne CBD in the City of Boroondara, and its houses range from 1880s land-boom Victorian homes to townhouses and apartment blocks, so the roof space, ceiling height and outdoor position differ from street to street. Peak Air Conditioning Hawthorn installs ducted reverse cycle systems, zoned layouts, slim units for tight ceilings and add-on cooling for existing gas ducted heaters. Refrigerant work is done under an ARC refrigerant handling licence, and the electrical circuit is done by a licensed electrician with a Certificate of Electrical Safety. A written, itemised quote follows a roof-space inspection. Call to book a site visit, from 6am to 10pm, seven days.
GET A FREE QUOTE
Air conditioning in Hawthorn covers a wide spread of homes, from Victorian houses in the Grace Park Estate to the flats and apartments that make up 59.1% of occupied dwellings in the suburb (ABS 2021 Census). Peak Air Conditioning Hawthorn handles installs, repairs, servicing and ducted heating across that housing, with each trade's work carried out under the licence it requires. Two things set the way a job is booked: the price is put in writing first, and the phone is answered across long days.
Peak Air Conditioning Hawthorn
A ducted system keeps the working parts out of sight: an indoor unit in the roof space or under the floor, an outdoor unit outside, and insulated ducts carrying air to grilles in each room. Daikin notes that only the controller, the return air grille and the discharge grilles are visible inside the home. Four configurations cover most of the houses in Hawthorn.
A ducted reverse cycle system is a heat pump: the same equipment cools the house in summer and heats it in winter. The Australian Government's Energy Rating site explains that air conditioners which both heat and cool are known as reverse cycle systems, and that air conditioners can also be called heat pumps. Daikin lists reverse cycle and cooling-only ducted options, so a household that wants winter warmth should confirm the model is reverse cycle before it is ordered. For homes where heating is the main reason to go ducted, the ducted heating page compares gas and electric options.
Zoning divides the ductwork into areas with motorised dampers, so conditioned air goes only to the rooms in use. Mitsubishi Electric states that its Zone Controller can create up to 4 or 8 separate zones, and suggests cooling the living areas during the day and switching to the bedrooms at night. In a house with bedrooms at the front and a kitchen and living extension at the rear, those two parts can run as separate zones. Mitsubishi Electric adds that the right zoning depends on the floor plan, lifestyle and the capacity of the system, so the number of zones is set at the quote.
Not every ceiling space can take a standard indoor unit. Mitsubishi Electric describes ducted systems for bulkheads as the slim, discreet option where ceiling space is limited, and states that its PEAD Series stands 250 mm high across a 5.0 kW to 14.0 kW range, for low ceilings and tight bulkhead cavities where a conventional unit will not fit. Daikin sells a Slimline range designed for installations where ceiling space is at a premium, including shallow and drop ceilings. Mitsubishi Electric also notes that a bulkhead system is designed to serve a single room, while a ducted system serves several.
Many established homes already have gas ducted heating, with ducts and floor or ceiling outlets in place. Add-on cooling fits a cooling coil to that system and connects an outdoor unit, so the existing ducts carry cool air in summer while the gas heater keeps doing the winter work. Rinnai lists Brivis ICE add-on cooling with ductwork under the floor or in the roof space, and names the Brivis Buffalo BX5C heater as a good match for it; Braemar's range also includes ducted add-on cooling. Mitsubishi Electric notes that existing ductwork may be compatible with a new ducted system depending on its condition, so the heater, ducts and outlets are inspected first.


Peak Air Conditioning Hawthorn
Most of a ducted installation happens above the ceiling. Mitsubishi Electric states that ducted air conditioning can be installed in an existing home, that the work needs access to the ceiling cavity, and that a qualified installer assesses the roof space to decide how the ductwork is routed.
Before any price is given, the installer goes up through the manhole and, where the house has one, into the subfloor. The check covers headroom above the ceiling joists, where the indoor unit can sit and still be reached for servicing, a clear path for each duct, the condition of any existing ducts and ceiling insulation, and the state of the ceiling below. Rinnai notes that a ducted system requires sufficient roof or underfloor space. A low or crowded roof may point to a slim unit, one of Daikin's underfloor ducted models, or a different system, and that decision is made at the inspection rather than on installation day.
The indoor unit, also called the fan coil, is mounted on supports in the roof space or slung beneath the floor, with a condensate drain taken to a safe outlet. Insulated flexible ducts run from the unit to a supply grille in each room, and a larger return air grille draws air back through a filter, often from a hallway or central room. Mitsubishi Electric's larger PEA-M-HAA models have a two-piece construction so they can be installed through ceiling access, which helps in an existing home where the roof cannot be opened up. Grille positions are marked to clear light fittings, cornices and ceiling roses before a hole is cut.
The outdoor unit for a whole-house system is larger than a single split condenser and needs a level base, clear airflow around it and room for a technician to work. A side passage or rear yard is the usual choice, kept away from a neighbour's bedroom window where possible. Insulated refrigerant pipes and a control cable run from the outdoor unit to the indoor unit, often up an external wall and into the roof. A system of this size typically runs on its own circuit from the switchboard, installed by a licensed electrician, so the switchboard is looked at during the site visit as well.
Once the system is charged and running, the airflow at each outlet is checked and the zone dampers adjusted so the far rooms are not starved while the nearest ones are over-supplied. The zone controller is programmed with the household's zones and any schedules. Mitsubishi Electric notes that Wi-Fi control needs an additional Wi-Fi adaptor, which is compatible with its zone control, so phone control is set up only where that part is fitted. The owner is shown how to switch zones and modes and how to clean the return air filter; ongoing care is covered on the air conditioning service page.
Peak Air Conditioning Hawthorn
A ducted install combines refrigeration work, electrical work, roof-space work and sometimes gas work. Peak Air Conditioning Hawthorn arranges each part under the licence it requires and puts the full scope in writing before work starts.
The Australian Refrigeration Council states that any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, and it counts installing and commissioning as handling. On a ducted job that covers joining and pressure testing the refrigerant lines and charging the system. The new circuit is a separate trade: a licensed electrician does it and, as Energy Safe Victoria explains, must give the customer a Certificate of Electrical Safety, which the Electricity Safety Act 1998 requires. Where a gas heater is disconnected, that part is done by a licensed gasfitter registered with the Building and Plumbing Commission.
A ducted system has many more parts than a split, so one headline number hides a lot. The written quote lists the indoor and outdoor models and their capacity, the number and position of supply and return grilles, the duct type, the number of zones and the controller, any electrical or gas work, and the removal of old equipment. Laid out that way, two quotes can be compared on the same scope rather than on price alone. If something found in the roof changes the scope, it is discussed and agreed before any extra work goes ahead.
Roof-space inspections are booked between 6am and 10pm, seven days a week, so a measure-up can happen before work, in the evening or on a weekend. A same-day visit is offered where possible. Because the inspector needs to reach the manhole and, in some houses, the subfloor, it helps to clear the cupboard or hallway below the manhole before the visit. In an apartment building, the visit can be timed around building access and lift bookings.


Peak Air Conditioning Hawthorn
The figures below are indicative ranges published by Melbourne cost guides, not Peak prices. A fixed price is given in the written quote once the roof space and switchboard have been seen.
QuickAir's 2026 Melbourne guide puts an installed ducted system for a small 1 to 2 bedroom home at $5,000 to $8,000, and a typical 3 to 4 bedroom outcome at $8,000 to $14,000. The whatsthedamage Melbourne guide (updated November 2026) lists standard ducted for a 3-bedroom house, or a single-storey 4-bedroom with good roof access, at $8,400 to $14,700, with $11,550 typical. For a larger 4-bedroom home, a two-storey house or a room-by-room zoned layout, the same guide moves to $12,600 to $23,100, with $16,800 typical.
Capacity is the largest driver: a bigger floor area, taller ceilings or poor insulation call for a larger indoor and outdoor unit. Each extra zone adds a motorised damper and wiring, and the controller has to suit the zone count. Ductwork adds cost with every extra outlet and every metre of run, and a tight or hot roof space slows the work. Where old ducts have to go, whatsthedamage puts whole-house replacement of ducted heating ductwork with new insulated flexible ducts at $2,000 to $6,300 in Melbourne. A new circuit and the removal of old equipment appear as separate lines in the quote.
The Victorian Energy Upgrades program lists indicative household discounts for removing or replacing a ducted gas heater with an efficient ducted reverse cycle system: up to $2,520 for a 10 kW system, up to $4,200 for 16 kW and up to $5,530 for 22.4 kW (energy.vic.gov.au, page updated 29 October 2026). The product must be approved under the program, be a high-efficiency reverse cycle air conditioner and come with a minimum 5-year warranty for a home, and a replacement must be in a property more than 2 years old. Whether a specific model qualifies is confirmed in the quote.
The same Victorian Government page states that removing or replacing a ducted gas heater with an efficient reverse cycle system can bring energy bill savings of up to $1,140 a year. Homeupkeep, a Melbourne cost guide updated June 2026, estimates yearly heating for a well-insulated 3-bedroom home at $300 to $550 with reverse cycle, against $700 to $1,100 with a 5-star ducted gas heater, at its assumed tariffs of $0.045 per MJ for gas and $0.32 per kWh for electricity. Actual bills depend on tariffs, insulation and how many zones run. A home that drops gas altogether also drops a second supply charge, since the Victorian Government notes an all-electric home has one energy bill with one service charge.
Peak Air Conditioning Hawthorn
Both are reverse cycle heat pumps; the difference is how the conditioned air reaches each room. The better choice depends on how many rooms need it, where the equipment can go and the budget.
Ducted suits a house where most rooms need heating and cooling, there is workable roof or subfloor space, and the owners would rather not have an indoor unit on every wall. One outdoor unit serves the whole house, which keeps a narrow side passage free of a row of condensers. It also suits period rooms where a wall-mounted head would sit awkwardly against cornices, picture rails or decorative plaster, and homes replacing a gas ducted heater whose ducts may be suitable to reuse once inspected. Zoning means bedrooms and living areas can still be run separately.
Split systems are usually the better buy when only one to three rooms need conditioning, when there is no usable roof space, or when the budget is tight. Each room has its own unit, so a fault in one leaves the others running, and rooms can be added one at a time. The ABS 2021 Census counts 59.1% of occupied Hawthorn dwellings as flats or apartments, and for many of those homes a split or multi-head system is the practical choice. Layouts and unit types are covered on the split system installation page.
On upfront price, whatsthedamage lists a supplied and installed 3.5 kW split at $1,475 to $2,950 in Melbourne, against $8,400 to $14,700 for standard ducted in a 3-bedroom house. Running cost follows how much of the house is conditioned: a split heating one room uses less power than a ducted system heating every room, while a zoned ducted system with unused zones closed narrows that gap. On noise, a ducted fan coil sits in the roof or under the floor, so the rooms mostly hear air moving through the grilles, whereas a split's indoor head is in the room itself. For splits, the Zoned Energy Rating Label shows inside and outside noise ratings, which makes them easier to compare.


Peak Air Conditioning Hawthorn
The best ducted system is the one sized and zoned for the house, from a range that fits its ceiling space. The brand question comes after those two.
Rinnai's guidance on ducted systems lists the sizing factors as total floor area, ceiling height, insulation and glazing, orientation and climate zone, worked through in a whole-of-home heat load calculation. A tall ceiling adds air volume above the same floor area, large sash windows or west-facing glass add summer heat, and an uninsulated ceiling lets winter warmth escape. An undersized system leaves the far rooms short of air on the hottest and coldest days, while an oversized one costs more to buy than it needs to. The calculation is done room by room at the site visit and the capacity is shown on the quote.
Daikin lists Premium Inverter and Inverter ducted ranges, a Slimline range for limited ceiling space, bulkhead units and underfloor versions, which it describes as suited to colder climates where heating is a focus. Mitsubishi Electric offers the PEA-M-HAA range, whose two-piece construction it describes as ideal for existing homes, and the 250 mm high PEAD Series for low ceilings. ActronAir states that its ducted systems are made for Australian conditions and that zoning allows areas to be controlled centrally and individually. Side by side, Daikin's page lists the most formats, including underfloor, Mitsubishi Electric publishes a clear slim-unit height, and ActronAir's page makes no quantified efficiency claim. The manufacturer warranty applies when installed to the manufacturer's requirements.
Daikin states that its ducted systems use variable-speed inverter compressors for precise temperature control, with inverter technology for reduced energy consumption, and that they combine quiet operation, zoning control and smart technology. A variable-speed compressor slows down as the house nears its set temperature instead of switching fully on and off. For smart control, Mitsubishi Electric's zone control works with its optional Wi-Fi adaptor, so zones can be switched from a phone. The Energy Rating site lists the Zoned Energy Rating Label as mandatory for non-ducted and single-split units, so a ducted model may not carry one in store, and efficiency is compared using the manufacturer's published data instead.
Peak Air Conditioning Hawthorn
The ABS 2021 Census records 24.3% of occupied Hawthorn dwellings as separate houses, 16.1% as semi-detached, row, terrace or townhouses and 59.1% as flats or apartments. Each type raises a different ducted question.
Hawthorn grew quickly in the 1880s land boom, and the Grace Park Estate, between Glenferrie Road and Power Street, still holds a fine collection of Victorian and Edwardian houses. Many houses of that period have tall ceilings, which adds air volume to the heat load, and decorative plaster such as cornices and ceiling roses that grilles have to be placed around. The roof space above them varies: some is generous, some has been reduced by later renovations, and a rear extension with a low roof may need a slim unit or its own system. Several Hawthorn houses, such as Invergowrie in Coppin Grove, are on the Victorian Heritage Register, so for any property with heritage controls the City of Boroondara should be asked before equipment is fixed where the street can see it.
A two-storey house or townhouse has to get ducts to both levels, and warm air rises towards the upper floor. Some are served by one system with upstairs and downstairs set up as separate zones; others need two systems, one in the roof for the upper floor and another under the floor or in a bulkhead for the ground floor. Which applies depends on the floor plan and the route available between floors, which Mitsubishi Electric notes is the basis of any zoning design. The whatsthedamage Melbourne guide places two-storey homes in its higher $12,600 to $23,100 band, and a townhouse with an owners corporation may also need approval for the outdoor unit.
Most apartments have little or no roof space, so whole-apartment ducting is often impractical; a slim ducted unit in a lowered hallway ceiling or bulkhead may serve a few rooms instead, as Mitsubishi Electric describes for its PEAD Series. The owners corporation comes first. Under the Consumer Affairs Victoria model rules, which apply only where the owners corporation has made no rule of its own on the item, an owner needs written approval to change the external appearance of a lot (rule 5.2(1)), that approval cannot be unreasonably withheld but may carry reasonable conditions (rule 5.2(2)), and common property cannot be altered without written approval (rule 4.3(1)). EPA Victoria residential noise rules also apply to the outdoor unit: for cooling, use is restricted on weekdays before 7am and after 11pm, and on weekends and public holidays before 9am and after 11pm.


Call between 6am and 10pm, seven days, or send a message with the suburb, the system and the fault or room you want heated or cooled. A photo of the existing unit and its model plate helps the technician prepare.

The technician inspects the home or premises, checks access, pipe runs and the electrical supply, and explains the options. You then receive a written quote listing the work and any discount that applies, before anything is installed or repaired.

Once the quote is accepted, the work is booked at a time that suits you. At handover the system is tested, the controls and filter cleaning are explained, and any compliance certificate the work requires, such as gas or electrical, is provided.
The whatsthedamage Melbourne guide (November 2026) puts standard ducted for a single-storey 4-bedroom house with good roof access at $8,400 to $14,700, with $11,550 typical. A larger 4-bedroom home, a two-storey house or a room-by-room zoned layout falls in its $12,600 to $23,100 band. QuickAir's 2026 Melbourne guide gives a typical 3 to 4 bedroom outcome of $8,000 to $14,000. These are indicative ranges, and a fixed written price follows a roof-space inspection.
Neither is better for every home. Ducted suits a house where most rooms need heating and cooling and there is usable roof or subfloor space, with only grilles and a controller visible inside. Split systems suit a few rooms, apartments without ceiling space and tighter budgets, and a fault in one unit leaves the others running. The choice is made once the roof space and floor plan have been seen.
It depends on how much of the home is being conditioned. A split heating or cooling one room uses less power than a ducted system running every room, but a zoned ducted system with unused zones closed narrows that gap. Efficiency also differs by model, so compare the manufacturer's data for ducted units and the Zoned Energy Rating Label for splits. Tariffs, insulation and how long the system runs matter as much as the system type.
A ducted install is a much bigger job than a single split, because it involves the indoor unit, every duct and grille, the outdoor unit, refrigerant lines and usually a new circuit. Roof access, the number of outlets and zones, and whether old ducts or a gas heater are being removed all change the time needed. A two-storey house with two systems takes longer again. The expected timeframe is set out in the written quote after the roof-space inspection.
Sometimes, where there is enough ceiling space or a hallway ceiling can be lowered. Mitsubishi Electric's PEAD Series is 250 mm high and is designed for low ceilings and tight bulkhead cavities, and Daikin sells a Slimline range for limited ceiling space. Owners corporation approval usually comes first, because the outdoor unit and pipe route can change the outside of the building or affect common property. Where ducting will not fit, split systems are the usual alternative.
Yes. The Victorian Energy Upgrades program lists discounts of up to $5,530 for removing or replacing a ducted gas heater with an efficient reverse cycle system, and energy bill savings of up to $1,140 a year. Mitsubishi Electric notes that existing ductwork may be compatible with a new system depending on its condition, and Braemar's Dominator Series 2 is designed to replace the gas heater unit directly. The gas supply to the old heater is made safe by a licensed gasfitter registered with the Building and Plumbing Commission.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm