Reverse Cycle Air Conditioning Hawthorn, Warm Winters and Cool Summers

Reverse cycle air conditioning Hawthorn households install is, for most of the year, a heating system that also cools. One unit moves heat out of the house in summer and pulls heat in from the outdoor air in winter, so a home can replace a gas room heater with electricity. Hawthorn sits about 6 km east of the Melbourne CBD in the City of Boroondara, where 1880s land-boom houses stand beside townhouses and apartment blocks. Peak Air Conditioning Hawthorn installs high wall, floor console, multi-head and ducted reverse cycle systems, sized for the winter heating load of each room. Refrigerant work is done under an ARC refrigerant handling licence, and the circuit is wired by a licensed electrician who issues a Certificate of Electrical Safety. A written quote follows an inspection, with any Victorian Energy Upgrades discount shown. Call to book a quote, 6am to 10pm, seven days.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Hawthorn for Reverse Cycle Air Conditioning

Air conditioning in Hawthorn covers a wide spread of homes, from Victorian houses in the Grace Park Estate to the flats and apartments that make up 59.1% of occupied dwellings in the suburb (ABS 2021 Census). Peak Air Conditioning Hawthorn handles installs, repairs, servicing and ducted heating across that housing, with each trade's work carried out under the licence it requires. Two things set the way a job is booked: the price is put in writing first, and the phone is answered across long days.

Peak Air Conditioning Hawthorn

Reverse Cycle Air Conditioning Hawthorn: Split, Floor Console, Multi-Head and Ducted Systems

The Australian Government's Energy Rating site explains that air conditioners come as cooling only, heating only, or heating and cooling, which is known as reverse cycle. Every format below can be bought in reverse cycle form, and the right one depends on the room, the wall space and how many rooms need winter heat.

High wall reverse cycle units for living rooms and bedrooms

A high wall unit is the most common reverse cycle format: an indoor head near the ceiling and an outdoor unit joined by refrigerant pipe. Mitsubishi Electric's MSZ-AP wall series runs from 2.5 kW to 7.8 kW on R32 refrigerant and lists reverse cycle heating as a feature, quoting indoor sound as low as 18 dB(A) in heating mode, which suits a bedroom. In a living room, the head is placed so warm air reaches the seating area rather than blowing straight at a doorway.

Floor console reverse cycle units under windows and in bay windows

A floor console sits low on the wall, so the warm air starts at floor level where people sit. Daikin describes its floor standing units as the better fit for colder climates where heating is a priority, and notes that mounting lower warms the ground more effectively. It also suits rooms where the upper wall is not available, such as a front room in a Victorian house where tall windows, picture rails or a bay window take the space a wall head would need.

Multi-head reverse cycle systems heating several rooms from one outdoor unit

A multi-head connects two or more indoor units to one outdoor unit. Mitsubishi Electric's MXZ range runs from 2 ports on the MXZ-2F52 to 6 ports on the MXZ-6F120, and the company notes that the outdoor unit's output is shared between the heads running at the same time, which all work in the same mode. For winter that matters: three bedrooms heating together at night draw on one compressor, so the outdoor unit is chosen for the combined heating load, not the cooling figure alone.

Ducted reverse cycle for whole-house heating and cooling

Ducted reverse cycle puts the indoor unit in the roof space or under the floor and sends warm or cool air through insulated ducts to grilles in each room. It suits a house where most rooms need winter heating, and it is often how a gas ducted heater is replaced with an all-electric system. Daikin sells underfloor ducted models it describes as suited to colder climates where heating is a focus. Roof space checks, zoning and grille layout are covered on the ducted air conditioning page.

Balwyn Emergency Air Conditioning Repair
Ashburton Emergency Air Conditioning Repair

Peak Air Conditioning Hawthorn

Reverse Cycle Installation Set Up for Heating as Well as Cooling

A reverse cycle air conditioning installation in Melbourne has to be planned for the cold months, because that is when the system does most of its work. The four steps below are where a heating-first install differs from a summer-only job.

Sizing each room for its winter heating load

Rinnai lists the inputs to a heat load calculation as total floor area, ceiling height, insulation and glazing, orientation and climate zone. In a Hawthorn period house a tall ceiling, a big sash window facing south or an uninsulated ceiling can each raise the heating load well above what the floor area suggests. The Zoned Energy Rating Label shows a model's heating output separately from its cooling output, so the unit is chosen on its heating kilowatts for the coldest room, and that capacity is written on the quote.

Outdoor unit clearance, airflow and defrost water drainage

In heating mode the outdoor unit draws heat out of the outside air, so it needs open space around it for that air to move; a unit boxed into a narrow side passage or hemmed in by a fence has less air to work with. On cold, damp mornings ice can form on the outdoor coil, and the unit runs a defrost cycle to clear it. The meltwater drips from the base, so the outdoor unit is placed where that water can drain away from paths, steps and doorways rather than freezing where people walk.

Thermostat, timer and Wi-Fi control set-up for cold mornings

At handover the controller is set so the house is warm when people get up, rather than switched on in a cold room and left on high. A timer that starts the heating a little before the alarm, at a moderate set temperature, is usually all that is needed. Wi-Fi control depends on the model, and Mitsubishi Electric notes that its ducted systems need an additional Wi-Fi adaptor. Timers should also respect EPA Victoria's residential noise rules, which restrict heating use where a neighbour can hear it on weekdays before 7am and on weekends and public holidays before 9am.

Commissioning in heating and cooling mode before handover

Once the refrigerant lines are pressure tested, evacuated and charged, the system is run in both modes before the installer leaves. In heating the check covers the air temperature leaving the indoor unit, the outdoor fan and coil, and the condensate and defrost drainage; in cooling it covers the drain from the indoor unit and the airflow across the room. Testing both modes on day one means a fault in the reversing side shows up at the install, not on the first frosty morning of winter.

Peak Air Conditioning Hawthorn

Why Choose Peak Air Conditioning Hawthorn

A reverse cycle system is refrigeration equipment, an electrical appliance and, very often, the replacement for a gas heater. Peak Air Conditioning Hawthorn arranges each of those parts under the licence the law requires and sets out the scope in writing.

Licensed refrigerant handling and electrical sign-off on every install

The Australian Refrigeration Council states that any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, so the refrigerant work on a reverse cycle install is done by a technician holding an ARC licence. The electrical connection is a separate trade: it is done by a licensed electrician, who must give the customer a Certificate of Electrical Safety, which Energy Safe Victoria says is required by the Electricity Safety Act 1998. Where a gas heater is being disconnected, that work goes to a licensed gasfitter registered with the Building and Plumbing Commission.

Written quotes listing the unit, the installation and any VEU discount

The written quote names the indoor and outdoor models with their heating and cooling capacity, the installation scope, any electrical work and any removal of an old heater or air conditioner. Where the job qualifies for a Victorian Energy Upgrades discount, that amount is shown as its own line, so the owner can see the price before and after it. A quote laid out this way can be compared line by line with another quote for the same rooms.

Quote visits and installs available 6am to 10pm every day

Quote visits and installations are booked between 6am and 10pm, seven days a week, with same-day visits where possible. An early or evening slot suits households who work weekdays, and it also suits rental providers and property managers meeting a tenant at the property. Booking the quote before winter gives time to sort out the electrical work, any owners corporation approval and the discount paperwork before the heating is needed.

Armadale Emergency Air Conditioning Repair
Ashburton Emergency Air Conditioning Repair

Peak Air Conditioning Hawthorn

What Reverse Cycle Air Conditioning Costs in Hawthorn

The figures below are indicative ranges from cost guides, not Peak prices. A fixed price is given in the written quote once the rooms, the outdoor position and the switchboard have been seen.

Installed prices for split, multi-head and ducted reverse cycle systems

The hipages reverse cycle cost guide (updated January 2026, national) puts a simple reverse cycle split at around $1,400 to $3,000 supplied and installed, and ducted reverse cycle at around $8,000 to $15,000. For several rooms on one outdoor unit, the whatsthedamage Melbourne guide (updated November 2026) lists a four-head multi-split at $7,350 to $12,600, with $8,900 typical. Larger or zoned ducted homes cost more again, and those bands are set out on the ducted page.

How capacity, pipe length and electrical work change the quote

A larger heating capacity means a larger and dearer unit, and a cold, tall-ceilinged room can push a living area into the next size up. Every extra metre of pipe between the indoor and outdoor units adds material and labour, as does a second-storey or roof position for the outdoor unit. If the switchboard has no spare capacity or the unit needs its own circuit, the electrical work is a separate line. hipages puts installer labour at around $80 to $110 per hour nationally, so a longer job shows in the price.

Victorian Energy Upgrades discounts and eligibility rules

The Victorian Energy Upgrades program lists indicative household discounts of $630 to $1,610 for replacing a non-ducted gas room heater with a 3 kW to 9 kW efficient reverse cycle unit. For replacing a ducted gas heater with ducted reverse cycle, it lists up to $2,520 for 10 kW, up to $4,200 for 16 kW and up to $5,530 for 22.4 kW, and up to $2,940 for a multi-split with a 10 kW outdoor unit. The product must be approved under the program, carry a minimum 5-year warranty for a home and be high-efficiency reverse cycle, and a replacement must be in a property more than 2 years old (energy.vic.gov.au, updated 29 October 2026).

Peak Air Conditioning Hawthorn

Reverse Cycle Versus Gas Heating and Cooling-Only Systems

Most Hawthorn homes choosing reverse cycle are comparing it with one of two things: the gas heater already in the house, or a cheaper air conditioner that only cools. The four points below cover running cost, bills, safety and what a cooling-only unit gives up.

Running costs per hour and per winter against gas heating

The homeupkeep Melbourne running cost guide (updated June 2026) estimates a 7-star reverse cycle split at about $0.11 to $0.22 an hour, against $0.22 to $0.38 for a 5-star ducted gas heater, and a winter's heating for a well insulated three-bedroom home at about $300 to $550 with reverse cycle against $700 to $1,100 with ducted gas, using its stated gas and electricity tariffs. The official Victorian Energy Upgrades figures are savings of up to $460 a year when a gas room heater is replaced, and up to $1,140 a year when a ducted gas heater is replaced.

One energy bill for an all-electric home

The Victorian Government's all-electric home guidance on energy.vic.gov.au points out that a dual-fuel home pays 2 bills for energy, electricity and gas, with 2 service charges, while an all-electric home pays 1 bill with 1 service charge. Once the gas heater is gone, a home with no other gas appliances can close the gas account. The same guidance estimates that an existing home without solar can save around $1,900 a year by switching from gas to efficient electric appliances, rising to around $2,230 with solar.

Carbon monoxide risk and gas heater servicing compared

Energy Safe Victoria warns that any gas heater can spill carbon monoxide, a poisonous gas that cannot be seen or smelt, and it recommends that gas heaters are serviced at least every two years by a qualified gasfitter who also tests for CO leakage. A reverse cycle air conditioner burns no fuel inside the house, so it has no flue and no combustion to check. It still needs regular cleaning and servicing, but that is air conditioning service work rather than a gasfitter's CO test.

Reverse cycle versus cooling-only air conditioners

A cooling-only unit only removes heat from a room, so it does nothing on a cold night. Mitsubishi Electric limits its cooling-only wall split series to Northern Australia, and Daikin sells cooling-only versions of some models, such as the Alira X Cooling Only, so the model name is worth checking before purchase. For a home that wants winter heating as well as summer cooling, a reverse cycle unit covers both seasons with one installation and one outdoor unit.

Armadale Emergency Air Conditioning Repair
Ashburton Emergency Air Conditioning Repair

Peak Air Conditioning Hawthorn

Reverse Cycle Heat Pumps for Melbourne Winter Heating

Reverse cycle heating is often misunderstood as an electric heater with a fan. The way it actually produces heat, and how it copes when the outdoor air is cold, explains both its running cost and how to choose a model for winter.

Reverse cycle air conditioners as air-to-air heat pumps

The Energy Rating site notes that air conditioners can also be known as heat pumps. A reverse cycle unit is an air-to-air heat pump: refrigerant absorbs heat from the outdoor air, the compressor raises its temperature, and the indoor coil releases that heat into the room. In summer a reversing valve sends the refrigerant the other way, so heat is taken from the room and released outside. Because the unit moves heat rather than making it from a heating element, it delivers more heat than an element would from the same electricity.

Outdoor operating ranges for frosty Melbourne mornings

Every model has a stated outdoor temperature range over which it is designed to heat. Mitsubishi Electric gives its MSZ-AP wall series a guaranteed outdoor operating range in heating of minus 15C to 24C. That figure applies to the MSZ-AP series only, and other brands and models publish their own ranges, so the specification sheet is the place to check. On a frosty morning the unit also pauses briefly to defrost the outdoor coil, and heating output falls as the outside air gets colder.

Heating capacity at two outdoor temperatures on the energy label

The Zoned Energy Rating Label displays heating capacity at two outdoor temperatures and cooling at one, in kilowatts, under the test conditions set by the Australian and New Zealand Standard. The higher the kW figure, the more heat the unit delivers at that outdoor temperature, so the colder of the two heating figures is the one to compare for winter. The label also gives star ratings for hot, average and cold climate zones, and the Energy Rating Calculator works out which zone applies from a postcode.

Peak Air Conditioning Hawthorn

Reverse Cycle Air Conditioning for Hawthorn Rental Properties

The ABS 2021 Census counts 45.6% of occupied private dwellings in Hawthorn as rented, against 28.5% across Victoria, so rental heating rules affect a large share of the suburb's homes.

Victorian rental heating rules from 1 March 2027

The Victorian Energy Upgrades program states that when a space heater in a rental home breaks and cannot be repaired after 1 March 2027, it must be replaced with an efficient reverse cycle air conditioner with an outlet in the main living area. For a rental provider, that means planning the replacement before the old heater fails, rather than arranging a heater in a hurry in the middle of winter. Separately, Consumer Affairs Victoria requires gas and electrical safety checks in rental homes every 2 years.

An efficient reverse cycle outlet in the main living area

Consumer Affairs Victoria's minimum standards require a fixed heater in good working order in the main living area of every rental property, and an energy efficient fixed heater for rental agreements entered into from 29 March 2023. For agreements that started earlier, rental providers should check the current Consumer Affairs Victoria standards to see what applies to their lease. In an apartment the outdoor unit may also need owners corporation approval: under the Consumer Affairs Victoria model rules, which apply only where the owners corporation has made no rule of its own, changing the external appearance of a lot needs written approval (rule 5.2(1)), approval cannot be unreasonably withheld (rule 5.2(2)), and common property cannot be altered without written approval (rule 4.3(1)).

VEU eligibility and quotes for rental providers

The Victorian Energy Upgrades product rules are the starting point for a rental replacement: an approved, high-efficiency reverse cycle product with a minimum 5-year warranty for a home, in a property more than 2 years old. Rental providers should confirm with the program that the property and the replacement qualify before signing. The written quote shows the model, its capacity, the outlet position in the main living area and the discount line, which gives a property manager the details needed for the owner's approval.

Armadale Emergency Air Conditioning Repair

TESTIMONIALS

What Our Reverse Cycle Air Conditioning Customers Say About Us

The Process

3 Step Process For Your Reverse Cycle Air Conditioning Needs

Call or Send the Job Details

Call between 6am and 10pm, seven days, or send a message with the suburb, the system and the fault or room you want heated or cooled. A photo of the existing unit and its model plate helps the technician prepare.

Inspection and Written Quote

The technician inspects the home or premises, checks access, pipe runs and the electrical supply, and explains the options. You then receive a written quote listing the work and any discount that applies, before anything is installed or repaired.

Install or Repair, Then Handover

Once the quote is accepted, the work is booked at a time that suits you. At handover the system is tested, the controls and filter cleaning are explained, and any compliance certificate the work requires, such as gas or electrical, is provided.

FREQUENTLY ASKED QUESTIONS

Reverse Cycle Air Conditioning In

Everything you need to know about our Reverse Cycle Air Conditioning In

How much does reverse cycle air conditioning cost to install?

The hipages reverse cycle cost guide (January 2026, national) puts a simple split at around $1,400 to $3,000 supplied and installed, and ducted reverse cycle at around $8,000 to $15,000. A four-head multi-split runs at $7,350 to $12,600 in the whatsthedamage Melbourne guide. Replacing a gas heater may qualify for a Victorian Energy Upgrades discount, from $630 for a small room unit up to $5,530 for a large ducted system. These are indicative ranges, and a fixed written price follows an inspection.

How does reverse cycle air conditioning work?

A reverse cycle system pumps heat rather than making it. In winter the refrigerant absorbs heat from the outdoor air, the compressor raises its temperature and the indoor unit releases it into the room. In summer a reversing valve sends the refrigerant the other way, taking heat out of the room and releasing it outside. The same indoor and outdoor units do both jobs.

Is reverse cycle air conditioning cheaper to run than gas heating?

In most comparisons, yes. The Victorian Energy Upgrades program lists energy bill savings of up to $460 a year when a gas room heater is replaced with an efficient reverse cycle unit, and up to $1,140 a year for a ducted gas heater. The homeupkeep Melbourne guide estimates a 7-star reverse cycle split at about $0.11 to $0.22 an hour against $0.22 to $0.38 for 5-star ducted gas. Actual costs depend on tariffs, insulation and how long the system runs.

Is a reverse cycle air conditioner a heat pump?

Yes. The Australian Government's Energy Rating site notes that air conditioners can also be known as heat pumps, and a reverse cycle unit is an air-to-air heat pump. It moves heat from the outdoor air into the house in winter and from the house to the outdoor air in summer. It is not the same product as a heat pump hot water system, which heats water rather than room air.

What is the difference between a split system and reverse cycle air conditioning?

A split system describes the layout: an indoor unit and an outdoor unit joined by pipes. Reverse cycle describes the function: the system both heats and cools. Mitsubishi Electric notes that most split systems do both, so most splits are reverse cycle, but some models are sold cooling-only. Ducted systems can also be reverse cycle, and the split system installation page covers the split layouts in detail.

Is it cheaper to run AC all day or turn it off?

For most homes, switching off when nobody is using the room costs less. The Energy Rating site notes that a household which only runs its air conditioner when it is needed uses less electricity than the label estimate, even though the unit works harder at first when it is switched on. A timer that starts heating shortly before people get up, at a moderate set temperature, gets most of the comfort without running all day. Closing doors to unused rooms helps the unit reach temperature sooner.

Request A Free Reverse Cycle Air Conditioning Quote

GET A FREE QUOTE