Split system installation Hawthorn homes need is rarely a box fitted to any spare wall. The suburb sits about 6 km east of the Melbourne CBD in the City of Boroondara, and its housing ranges from Victorian and Edwardian houses to townhouses and a majority of flats and apartments. Peak Air Conditioning Hawthorn fits wall-mounted, floor console and multi-head reverse cycle split systems, from a back-to-back job through a single wall to long pipe runs and second-storey outdoor units. Refrigerant connections are made by technicians holding an ARC refrigerant handling licence, and the electrical side is done by a licensed electrician. The unit, the install and any old unit removal are set out in a written quote after the home has been seen. Call to book an inspection and quote, with bookings from 6am to 10pm, seven days.
GET A FREE QUOTE
Air conditioning in Hawthorn covers a wide spread of homes, from Victorian houses in the Grace Park Estate to the flats and apartments that make up 59.1% of occupied dwellings in the suburb (ABS 2021 Census). Peak Air Conditioning Hawthorn handles installs, repairs, servicing and ducted heating across that housing, with each trade's work carried out under the licence it requires. Two things set the way a job is booked: the price is put in writing first, and the phone is answered across long days.
Peak Air Conditioning Hawthorn
A split system has two parts: an indoor unit that conditions the room and an outdoor unit that holds the compressor, joined by refrigerant pipes, a drain and a cable. The three indoor styles below suit different rooms, and the choice usually comes down to wall space, window layout and how many rooms need heating and cooling.
The wall-mounted head is the most common split system. Mitsubishi Electric notes that most split system air conditioners both heat and cool, and its MSZ-AP wall series covers 2.5 kW to 7.8 kW on R32 refrigerant. Some ranges also come in cooling-only versions, such as Daikin's Alira X Cooling Only, so a Hawthorn home that wants winter heating should confirm the model is reverse cycle before it is ordered; reverse cycle air conditioning installation covers both seasons with one unit. A wall head suits bedrooms, studies and living rooms with a clear stretch of upper wall.
A floor console sits low on the wall near the skirting, which helps in rooms where the upper wall is taken by a bay window, a picture rail, tall sash windows or built-in shelving. Daikin lists floor-standing units for rooms where upper wall installation is not possible, and for homes where heating is the priority for more months of the year. That situation can come up in the Victorian and Edwardian houses of the Grace Park Estate and other land-boom streets off Glenferrie Road. Because the console sits close to the floor, its pipes can often drop straight through to a subfloor rather than crossing a decorated wall.
A multi-head system connects several indoor units to a single outdoor unit. In Mitsubishi Electric's MXZ range, the number of connectable ports rises with outdoor capacity: two ports on the 5.2 kW models, three on the 5.4 kW, four on the 7.1 kW and 8.0 kW, and five on the 10.0 kW model, with a six-port 12.0 kW unit above that. Mitsubishi Electric notes that each room can be set to its own temperature without changing the others, within the same operating mode, and unused heads can be switched off.


Peak Air Conditioning Hawthorn
The installation follows the same broad steps on most jobs: a site check of where each unit can go, mounting the indoor bracket and outdoor unit, running the pipes, drain and cable, the electrical connection and then commissioning. What changes the time and the price is the distance and height between the two units.
In a back-to-back install the indoor head sits on the inside face of an external wall and the outdoor unit sits directly behind it outside. The pipe run is short, a single hole carries the pipes, drain and cable, and little pipework is visible. It is the simplest and usually the least expensive kind of split system install, and many single-room jobs in Hawthorn houses and ground-floor units can be laid out this way when the outside of that wall has room for the outdoor unit.
Where the wall behind the room faces the street, a neighbour's window or a narrow gap, the outdoor unit may need to go further away, along a side path, into a rear courtyard or against a back fence. The extra pipe is insulated and either run through the subfloor or roof space or covered in a duct along the outside wall. On a narrow single-fronted block, such as the 1880s cottages recorded on Melville, Smart, Barton and Connell streets, the side path may be the only practical spot. Longer runs add materials and labour, and each model has its own pipe-length limits set by the manufacturer, which the installer checks against the planned route.
In a two-storey house or an upstairs room with no ground below it, the outdoor unit may be mounted on a wall bracket at first-floor level or on a section of roof. That work needs safe access, which can mean ladders, a scaffold or a platform, and the unit still has to be reachable later for servicing. Mr Duct Cleaning, a Melbourne cleaner, notes that units high on a second-storey wall or on a roof need extra equipment to service, so the position chosen at install affects running costs for years.
Once the pipes are joined, the system is tested for leaks under pressure and then evacuated with a vacuum pump to remove air and moisture before the refrigerant is released. The Australian Refrigeration Council includes installing and commissioning among the tasks that need a refrigerant handling licence. The first run then checks heating and cooling, airflow, the drain fall and the controls, and the owner is shown the remote and the filters before the installer leaves.
Peak Air Conditioning Hawthorn
Peak Air Conditioning Hawthorn arranges each part of a split system install under the licence the law requires and puts the scope in writing before work starts.
The Australian Refrigeration Council states that any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, under the scheme known as ARCtick. On a split system install, that covers flaring and joining the pipes, pressure testing, evacuation and releasing the refrigerant. The electrical connection is done separately by a licensed electrician. Homeowners can ask for the technician's ARC licence number before work begins.
The quote names the indoor and outdoor models and their capacity, where each unit will be mounted, the route and length of the pipe run, any electrical work and whether an old unit is being taken out. Having those items in writing means the owner can compare quotes on the same scope rather than on a headline price, and any change to the scope is discussed before extra work goes ahead.
Bookings for inspections and installs are taken between 6am and 10pm, seven days a week, which helps households that cannot be home on a weekday. A same-day inspection is offered where possible. For apartments, the install time can be arranged around building access rules, lift bookings or owners corporation requirements, and noisy steps such as drilling a core hole can be timed with neighbours in mind.


Peak Air Conditioning Hawthorn
The figures below are indicative ranges from Melbourne cost guides and installers, not Peak prices. The fixed price comes in the written quote after the home has been inspected.
Climate Control Solutions, a Melbourne installer (figures reviewed July 2026), lists indicative installed prices of around $1,900 to $2,500 for a 2.5 kW split, $2,300 to $2,900 for 3.5 kW, $2,700 to $3,500 for 5.0 kW, $3,300 to $4,300 for 7.1 kW and $3,700 to $4,700 for 8.0 kW. The same page puts a 3.5 kW back-to-back job at around $2,100 to $2,600. The brand, the model's features and its energy rating move a price within each band.
Labour is where a simple install and a complex one differ most. The hipages cost guide (January 2026, national) puts a basic installation at $600 to $1,000 and larger, complex installations at $1,000 to $2,000. The whatsthedamage Melbourne guide (November 2026) lists install-only labour for a customer-supplied split at $735 to $1,575. Long pipe runs, a second-storey or roof position, core drilling through solid brick and difficult access push a job towards the top of those ranges.
The whatsthedamage Melbourne guide puts a supplied and installed two-head multi-split at $4,200 to $7,900, with $5,800 typical, and a four-head system at $7,350 to $12,600, with $8,900 typical. Climate Control Solutions compares two separate 3.5 kW splits at about $4,600 to $5,800 installed with a two-head multi-head at around $4,000 to $5,200. The number of heads, the pipe run to each room and the outdoor unit size set where a job lands.
Larger units may need a dedicated circuit from the switchboard; Climate Control Solutions suggests allowing roughly $450 for that licensed electrical work. Taking out an old unit adds about $250 per unit on the same page, while whatsthedamage puts removal and disposal at $105 to $370. A wall bracket for an outdoor unit that cannot sit on the ground has no published price in the sources checked, so it is itemised in the quote once the wall and height are known.
Peak Air Conditioning Hawthorn
Both options can heat and cool several rooms. The better choice depends on outdoor space, how the rooms are used, and how much a single point of failure matters to the household.
A multi-head suits a home with little room outside for condensers, such as an apartment with one small balcony or a terrace with a narrow rear yard. Mitsubishi Electric says the design minimises the impact outdoor units have on the look of the house and takes up less space outside. It also suits rooms used at different times, like bedrooms at night and a study by day, because the outdoor unit's power is shared between the heads that are running at once.
Separate splits make sense when the rooms are far apart, when each room needs its full rated output at the same time, or when one room needs heating while another needs cooling, since multi-head heads run in the same operating mode. Mitsubishi Electric's own example shows two heads on one outdoor unit giving 2.8 kW and 4.0 kW when both run, against 5.0 kW for the larger head alone. Single splits can also be added one room at a time as the budget allows.
On a multi-head system the compressor for every room sits in one outdoor unit, so a fault there stops heating and cooling in all the connected rooms until it is repaired. With separate splits, a fault in one outdoor unit affects only that room, and the others keep running. For a household that relies on one room staying warm or cool, that difference can outweigh the outdoor space saved. Diagnosis and fixes are covered on the air conditioning repair page.


Peak Air Conditioning Hawthorn
There is no single best split system for every room. The Australian Government's Energy Rating advice is to choose the size and features needed first, then use the star rating to compare similar models.
In a bedroom, the indoor unit's sound level matters as much as its output. The Zoned Energy Rating Label shows separate inside and outside noise ratings in dB(A), so two models can be compared side by side. Mitsubishi Electric quotes its MSZ-AP wall series as running as low as 18 dB(A) in heating mode. A head mounted away from the bed, with the airflow aimed across the room rather than at the pillow, also makes a bedroom unit easier to sleep with.
An open-plan kitchen, dining and living area holds more air than a bedroom, and it often has large windows or doors to a garden. Daikin describes its XL Series as large capacity models designed for large open-plan living, and the Melbourne price tables run up to 7 kW to 9 kW for single splits. Where one large unit would struggle to reach the far end of a long room, two smaller heads can spread the air more evenly. Whole-home options are compared on the ducted air conditioning page.
The Zoned Energy Rating Label gives a seasonal efficiency rating for hot, average and cold climate zones, from 1 to 10 stars, and its capacity panel shows heating output at two outdoor temperatures. The Energy Rating Calculator finds the climate zone for a postcode, so a Hawthorn buyer can see which zone applies. As an example, Mitsubishi Electric lists its MSZ-AP25 at 3.5, 3 and 3 heating stars across the hot, average and cold zones. More on heating with a heat pump is on the reverse cycle air conditioning page.
Daikin's split range comes as wall-mounted or floor-standing units, with wall models including Alira X, Zena and Cora, and Daikin states it was voted the most trusted air conditioner brand from 2023 to 2026 in Reader's Digest Australia Trusted Brands. Mitsubishi Electric lists an outdoor heating operating range down to minus 15 degrees for its MSZ-AP series. Fujitsu and Panasonic are also widely installed. The manufacturer warranty applies when the unit is installed to the manufacturer's requirements.
Peak Air Conditioning Hawthorn
The ABS 2021 Census counts 59.1% of occupied Hawthorn dwellings as flats or apartments and a further 16.1% as semi-detached, row, terrace or townhouses, so many split system installs here happen in shared buildings rather than freestanding houses.
Most apartment and unit buildings are managed by an owners corporation, and its rules can cover changes to the outside of the building, work on common property and where equipment may be fixed. Checking those rules and getting any approval in writing before the install avoids having to move an outdoor unit later. The building manager can usually say which walls, balconies or plant areas are allowed, and that answer shapes the quote and the pipe route.
In an apartment the outdoor unit usually sits on the balcony floor or on a wall bracket at the edge of the balcony, kept clear of doors and with space around it for airflow. A unit on the floor is easier to reach for servicing than one on a high bracket. Where the balcony is small, a multi-head can put two or three rooms on one outdoor unit. Older walk-up blocks may need a longer pipe route through a hallway ceiling or along an outside wall.
EPA Victoria treats noise from a split system as unreasonable if it can be heard in a habitable room of another home during prohibited times. For heating those times are weekdays before 7am and after 10pm, and weekends and public holidays before 9am and after 10pm; for cooling the evening limit is 11pm. During a heat health warning an air conditioner can be used at any time. Placing the outdoor unit away from a neighbour's bedroom window, and checking its outside noise rating, reduces the risk of complaints.


Call between 6am and 10pm, seven days, or send a message with the suburb, the system and the fault or room you want heated or cooled. A photo of the existing unit and its model plate helps the technician prepare.

The technician inspects the home or premises, checks access, pipe runs and the electrical supply, and explains the options. You then receive a written quote listing the work and any discount that applies, before anything is installed or repaired.

Once the quote is accepted, the work is booked at a time that suits you. At handover the system is tested, the controls and filter cleaning are explained, and any compliance certificate the work requires, such as gas or electrical, is provided.
Climate Control Solutions, a Melbourne installer, lists indicative installed prices of around $2,300 to $2,900 for a 3.5 kW split and $2,100 to $2,600 for a 3.5 kW back-to-back job. The whatsthedamage Melbourne guide puts a two-head multi-split at $4,200 to $7,900. A long pipe run, a second-storey outdoor unit, a new circuit or old unit removal adds to those figures. These are published ranges, not a quote, and a fixed written price follows an inspection.
A single back-to-back split, with the outdoor unit directly behind the indoor head, is usually finished within a day. A long pipe run, an outdoor unit on a second-storey wall or roof, or a new electrical circuit can extend the job. A multi-head system takes longer because each room needs its own pipe run to the outdoor unit. The expected timing is set out with the written quote.
No single model is best for every room. Daikin and Mitsubishi Electric are two of the most widely installed brands, alongside Fujitsu and Panasonic, and each has models with low indoor noise or strong heating output. The Energy Rating advice is to pick the size and features first and then compare star ratings on the Zoned Energy Rating Label, paying attention to the cold-zone heating stars if winter heating matters. The model is recommended at the quote once the room has been seen.
Sometimes, but not always. Climate Control Solutions compares two separate 3.5 kW splits at about $4,600 to $5,800 installed with a two-head multi-head at around $4,000 to $5,200. The saving depends on the pipe run to each room, and a multi-head puts every room on one outdoor unit, so a single fault stops them all. Peak Air Conditioning Hawthorn prices both options in the quote where both would work.
Bedrooms usually take one of the smallest wall models; Mitsubishi Electric's MSZ-AP series, for example, starts at 2.5 kW. The right capacity depends on the room's floor area, ceiling height, insulation, window size and which way it faces, so a tall-ceilinged bedroom in a period house can need more than a modern one of the same size. Indoor noise matters too, so compare the inside dB(A) rating on the label. The installer confirms the capacity after measuring the room.
In many buildings, yes, because the outdoor unit and pipes usually affect common property or the outside of the building. Owners corporation rules differ from building to building, so check the rules and ask the building manager before booking. Getting approval in writing first avoids having to relocate the outdoor unit later. Peak Air Conditioning Hawthorn can supply the unit size and the proposed position to include with the request.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm